D-Link KX-TDA100 Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Brány / ovladače D-Link KX-TDA100. D-Link KX-TDA100 User's Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 250
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků

Shrnutí obsahu

Strany 1 - Installation Manual

KX-TDA100 Model KX-TDA200Thank you for purchasing a Panasonic Hybrid IP-PBX.Please read this manual carefully before using this product and save th

Strany 2 - System Components

10 Installation ManualIntroductionThis Installation Manual is designed to serve as an overall technical reference for the Panasonic Hybrid IP-PBX, KX-

Strany 3 - Installation Manual 3

2.4 Installation of the Trunk Cards100 Installation ManualMaximum Cabling Distance of Extension ConnectionThe maximum distance of the extension cable

Strany 4 - T7565) series telephones

2.4 Installation of the Trunk CardsInstallation Manual 1012.4.11 IP-GW4 CardFunction4-channel VoIP gateway card. Compliant with VoIP H.323 V.2 protoco

Strany 5 - Important Safety Instructions

2.4 Installation of the Trunk Cards102 Installation ManualLED IndicationsIndication Colour DescriptionCARD STATUS Green/Red Card status indication• OF

Strany 6 - SAVE THESE INSTRUCTIONS

2.4 Installation of the Trunk CardsInstallation Manual 1032.4.12 IP-GW4E CardFunction4-channel VoIP gateway card. Compliant with VoIP H.323 V.2 protoc

Strany 7 - Precaution

2.4 Installation of the Trunk Cards104 Installation ManualLED IndicationsIndication Colour DescriptionCARD STATUS Green/Red Card status indication• OF

Strany 8 - SERIAL No.:

2.4 Installation of the Trunk CardsInstallation Manual 1052.4.13 IP-GW16 CardFunction16-channel VoIP gateway card. Compliant with VoIP H.323 V.2 proto

Strany 9 - Installation Manual 9

2.4 Installation of the Trunk Cards106 Installation ManualLED IndicationsIndication Colour DescriptionCARD STATUS Green/Red Card status indication• OF

Strany 10 - Introduction

2.5 Installation of the Extension CardsInstallation Manual 1072.5 Installation of the Extension Cards2.5.1 CSIF4 and CSIF8 CardFunctionCSIF4: 4-port C

Strany 11 - Installation Manual 11

2.5 Installation of the Extension Cards108 Installation ManualPin AssignmentsRJ45 ConnectorLED IndicationsNo. Signal Name Function1-2 Reserved –3 D1 D

Strany 12 - 12 Installation Manual

2.5 Installation of the Extension CardsInstallation Manual 1092.5.2 DHLC8 CardFunction8-port digital hybrid extension card for DPTs, APTs, SLTs, DSS c

Strany 13 - Table of Contents

Installation Manual 11Precautions for Users in the United KingdomFOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT CAREFULLY.This appliance is supplied

Strany 14 - 14 Installation Manual

2.5 Installation of the Extension Cards110 Installation ManualPin AssignmentsAmphenol ConnectorNo. Signal Name Function No. Signal Name Function1 RA S

Strany 15 - Installation Manual 15

2.5 Installation of the Extension CardsInstallation Manual 111LED IndicationsIndication Colour DescriptionCARD STATUS Green/Orange/RedCard status indi

Strany 16 - 16 Installation Manual

2.5 Installation of the Extension Cards112 Installation Manual2.5.3 DLC8 CardFunction8-port digital extension card for DPTs, DSS consoles, and PT-inte

Strany 17 - System Outline

2.5 Installation of the Extension CardsInstallation Manual 113Pin AssignmentsAmphenol ConnectorLED IndicationsNo. Signal Name Function No. Signal Name

Strany 18 - 1.1 System Highlights

2.5 Installation of the Extension Cards114 Installation Manual2.5.4 DLC16 CardFunction16-port digital extension card for DPTs, DSS consoles, and PT-in

Strany 19 - Hospitality Features

2.5 Installation of the Extension CardsInstallation Manual 115Pin AssignmentsAmphenol ConnectorLED IndicationsNo. Signal Name Function No. Signal Name

Strany 20 - 1.2 Basic System Construction

2.5 Installation of the Extension Cards116 Installation Manual2.5.5 SLC8 CardFunction8-port extension card for SLTs with 2 power failure transfer (PFT

Strany 21 - Hybrid IP-PBX

2.5 Installation of the Extension CardsInstallation Manual 117Pin AssignmentsAmphenol ConnectorLED IndicationsNo. Signal Name Function No. Signal Name

Strany 22 - Mountable Equipment

2.5 Installation of the Extension Cards118 Installation Manual2.5.6 EXT-CID CardFunctionSends Caller ID signals to extension ports. To be mounted on t

Strany 23

2.5 Installation of the Extension CardsInstallation Manual 1192.5.7 SLC16 and MSLC16 CardsFunctionAccessory and User-supplied ItemsAccessory (included

Strany 24 - 1.3 Options

12 Installation ManualHow to replace the fuse: Open the fuse compartment with a screwdriver and replace the fuse and fuse cover.The equipment must be

Strany 25

2.5 Installation of the Extension Cards120 Installation ManualPin AssignmentsAmphenol ConnectorLED IndicationsNo. Signal Name Function No. Signal Name

Strany 26

2.5 Installation of the Extension CardsInstallation Manual 1212.5.8 IP-EXT16 CardFunction16-channel VoIP extension card. Compliant with Panasonic prop

Strany 27 - 1.4 Specifications

2.5 Installation of the Extension Cards122 Installation ManualLED IndicationsIndication Colour DescriptionCARD STATUS Green/Red Card status indication

Strany 28

2.6 Installation of the Other CardsInstallation Manual 1232.6 Installation of the Other Cards2.6.1 OPB3 CardFunctionOptional 3-slot base card for moun

Strany 29 - 1.4.2 Characteristics

2.6 Installation of the Other Cards124 Installation Manual2.6.2 DPH4 CardFunction4-port doorphone card for 4 doorphones and 4 door openers. To be moun

Strany 30 - 1.4.3 System Capacity

2.6 Installation of the Other CardsInstallation Manual 125Pin Assignments8-pin Terminal Block10-pin Terminal BlockNo. Signal Name Function1 DP4 Doorph

Strany 31

2.6 Installation of the Other Cards126 Installation Manual2.6.3 DPH2 CardFunction2-port doorphone card for 2 German type doorphones and 2 door openers

Strany 32

2.6 Installation of the Other CardsInstallation Manual 127Pin Assignments8-pin Terminal Block10-pin Terminal BlockNo. Signal Name Function1 Path_2b Do

Strany 33 - MEC Card Calculation

2.6 Installation of the Other Cards128 Installation ManualConnection Diagram for German Type Doorphones and Door OpenersGerman Type Doorphone 2Doorpho

Strany 34 - Power Supply Unit Selection

2.6 Installation of the Other CardsInstallation Manual 1292.6.4 EIO4 CardFunction4-port external input/output card. To be mounted on the OPB3 card.Acc

Strany 35 - PSU Capability

Installation Manual 13Table of Contents1 System Outline...171.1 Sys

Strany 36

2.6 Installation of the Other Cards130 Installation ManualPin Assignments8-pin Terminal Block10-pin Terminal BlockNo. Signal Name Function1C4b Control

Strany 37 - Installation

2.6 Installation of the Other CardsInstallation Manual 131Connection Diagram for External SensorPower to the external sensor is provided from the EIO4

Strany 38 - 2.1 Before Installation

2.6 Installation of the Other Cards132 Installation Manual2.6.5 ECHO16 CardFunction16-channel card for echo cancellation during conferences. To be mou

Strany 39

2.6 Installation of the Other CardsInstallation Manual 1332.6.6 MSG4 CardFunction4-channel message card. To be mounted on the OPB3 card.Accessory and

Strany 40 - 2.2.1 Unpacking

2.6 Installation of the Other Cards134 Installation Manual2.6.7 CTI-LINK CardFunctionEthernet card for CTI communication via 10BASE-T port. CSTA Phase

Strany 41 - 2.2.2 Names and Locations

2.6 Installation of the Other CardsInstallation Manual 135LED IndicationsIndication Colour DescriptionCARD STATUS Green/Red Card status indication• OF

Strany 42 - Opening the Front Cover

2.7 Connection of Extensions136 Installation Manual2.7 Connection of Extensions2.7.1 Maximum Cabling Distances of the Extension Wiring (Twisted Cable)

Strany 43 - Closing the Front Cover

2.7 Connection of ExtensionsInstallation Manual 1372.7.2 Parallel Connection of the ExtensionsAny SLT can be connected in parallel with an APT or a DP

Strany 44 - Function

2.7 Connection of Extensions138 Installation ManualUsing an EXtra Device PortWith KX-T7600 Series DPT (except KX-T7665)With Other DPT (except KX-T7560

Strany 45 - Guide Rail

2.7 Connection of ExtensionsInstallation Manual 1392.7.3 Digital EXtra Device Port (Digital XDP) ConnectionA DPT can be connected to another DPT on th

Strany 46 - Back Board

14 Installation Manual2.4.12 IP-GW4E Card ...

Strany 47 - 4. Replace the PSU

2.7 Connection of Extensions140 Installation ManualUsing an EXtra Device PortSLTMaster DPT Slave DPT4-conductor wiring cordConnect pins "T",

Strany 48 - 2.2.5 Frame Earth Connection

2.7 Connection of ExtensionsInstallation Manual 141With KX-T7600E Series DPTUsing a Modular T-Adaptor4-conductor wiring cordConnect pins "D1"

Strany 49 - Installation Manual 49

2.7 Connection of Extensions142 Installation ManualUsing an EXtra Device PortConnecting to a Slave DPTSLTMaster DPT Slave DPT4-conductor wiring cordCo

Strany 50

2.7 Connection of ExtensionsInstallation Manual 143Connecting to a Master DPTSLTTo slave DPTTo S LTMaster DPT Slave DPT4-conductor wiring cordConnect

Strany 51

2.7 Connection of Extensions144 Installation Manual2.7.4 First Party Call Control CTI ConnectionCTI connection between a PC and a KX-T7633/T7636 DPT p

Strany 52 - Covering the Blank Slots

2.8 Connection of DECT Portable StationsInstallation Manual 1452.8 Connection of DECT Portable Stations2.8.1 OverviewThe following equipment is requir

Strany 53 - Handling of the Cables

2.8 Connection of DECT Portable Stations146 Installation ManualCAUTION• The CS should be kept free of dust, moisture, high temperature (more than 40 °

Strany 54

2.8 Connection of DECT Portable StationsInstallation Manual 1472.8.2 Procedure OverviewWhen connecting the wireless system, use extreme care to conduc

Strany 55 - 2.2.8 Types of Connectors

2.8 Connection of DECT Portable Stations148 Installation Manuale. Make sure that the radio signal strength level is greater than "3" at any

Strany 56 - 56 Installation Manual

2.8 Connection of DECT Portable StationsInstallation Manual 1492.8.3 Site PlanningChoosing the best site for the CS requires careful planning and test

Strany 57 - When connecting a BRI card

Installation Manual 153 Guide for the KX-TDA Maintenance Console ...2133.1 Overview ...

Strany 58 - 58 Installation Manual

2.8 Connection of DECT Portable Stations150 Installation ManualObject Material Transmission TendencyWall Concrete The thicker they are, the less radio

Strany 59 - Installation Manual 59

2.8 Connection of DECT Portable StationsInstallation Manual 151CS Coverage AreaThe example below shows the size of the coverage area of 1 CS if it is

Strany 60 - 60 Installation Manual

2.8 Connection of DECT Portable Stations152 Installation ManualWhere CS coverage areas overlap, the PS will start call handover to the next CS if the

Strany 61 - Anchor Plug

2.8 Connection of DECT Portable StationsInstallation Manual 1532.8.4 Before Site SurveyUse the KX-TCA255 or KX-TD7590 PS to conduct the site survey.No

Strany 62 - Screw (B)

2.8 Connection of DECT Portable Stations154 Installation ManualUsing the KX-TD7590NoteTo clear the CS ID number assigned to the PS, follow the procedu

Strany 63

2.8 Connection of DECT Portable StationsInstallation Manual 155Setting and Installing the CS Temporarily for Site Survey1. Switch the Radio Signal Tes

Strany 64

2.8 Connection of DECT Portable Stations156 Installation Manual3. After setting the DIP switch, connect an AC adaptor or battery box to the CS using a

Strany 65 - Screw (A) Metal Bracket

2.8 Connection of DECT Portable StationsInstallation Manual 1572.8.5 Site Survey Using the KX-TCA255/KX-TD7590The PS has a Radio Signal Test mode that

Strany 66 - Metal Bracket

2.8 Connection of DECT Portable Stations158 Installation Manuala. Move to the CS until the point the radio signal strength level becomes "12"

Strany 67 - Installation Manual 67

2.8 Connection of DECT Portable StationsInstallation Manual 1593. Repeat the steps 1 and 2 for other CSs, and relocate the CSs when necessary.a. Overl

Strany 68 - Overview

16 Installation Manual

Strany 69 - Installation of an Earth Rod

2.8 Connection of DECT Portable Stations160 Installation ManualReferring to the Stored Scan DataUsing the KX-TCA255Using the KX-TD7590Clearing the Sto

Strany 70 - 70 Installation Manual

2.8 Connection of DECT Portable StationsInstallation Manual 1612.8.6 After Site SurveyAfter obtaining the proper measurement results, exit the Radio S

Strany 71 - 2.3.1 MPR Card

2.8 Connection of DECT Portable Stations162 Installation Manual2.8.7 Connecting a Cell Station to the Hybrid IP-PBXUsing a CSIF CardRefer to the follo

Strany 72

2.8 Connection of DECT Portable StationsInstallation Manual 163Using a DHLC/DLC CardRefer to the following example to connect a CS to the Hybrid IP-PB

Strany 73 - 2.3.2 MEC Card

2.8 Connection of DECT Portable Stations164 Installation ManualConnecting the CS1. Connect the cable from the CSIF/DHLC/DLC card to the CS.2. Pass the

Strany 74 - 2.3.3 RMT Card

2.8 Connection of DECT Portable StationsInstallation Manual 165For the KX-TDA0142CE User only:3. Wrap the cable once around the ferrite core. Then clo

Strany 75

2.8 Connection of DECT Portable Stations166 Installation ManualRegistering the PSThe PS must be registered to the Hybrid IP-PBX before it can be used.

Strany 76

2.8 Connection of DECT Portable StationsInstallation Manual 167Using the KX-TD7590System lock can be set after PS registration. When system lock is en

Strany 77 - 2.4.2 DID8 Card

2.8 Connection of DECT Portable Stations168 Installation ManualSetting the Personal Identification Number (PIN) for PS RegistrationTo prevent register

Strany 78

2.8 Connection of DECT Portable StationsInstallation Manual 169PS TerminationConfirm the following before cancelling the PS registration:• PS is turne

Strany 79 - 2.4.3 CID/PAY8 Card

Installation Manual 17Section 1System OutlineThis section provides general information on the Hybrid IP-PBX, including the system capacity and specifi

Strany 80 - 2.4.4 CID8 Card

2.8 Connection of DECT Portable Stations170 Installation ManualTesting the OperationWalk around the service area while having a conversation using a r

Strany 81 - 2.4.5 E&M8 Card

2.8 Connection of DECT Portable StationsInstallation Manual 1712.8.8 Wall Mounting1. Place the reference for wall mounting (on the following page) on

Strany 82

2.8 Connection of DECT Portable Stations172 Installation ManualReference for Wall MountingPlease copy this page and use as a reference for wall mounti

Strany 83

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 1732.9 Connection of 2.4 GHz Portable Stations2.9.1 OverviewThe following equipment is

Strany 84 - 2.4.6 T1 Card

2.9 Connection of 2.4 GHz Portable Stations174 Installation ManualPlease take into consideration the distance between the CSs when site planning. Plea

Strany 85

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 1752.9.2 Procedure OverviewWhen connecting the wireless system, use extreme care to con

Strany 86

2.9 Connection of 2.4 GHz Portable Stations176 Installation Manual4. Finish the site surveyRefer to "2.9.6 After Site Survey".a. Return all

Strany 87 - 2.4.7 E1 Card

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 1772.9.3 Site PlanningChoosing the best site for the CS requires careful planning and t

Strany 88 - Switch Settings

2.9 Connection of 2.4 GHz Portable Stations178 Installation ManualObject Material Transmission TendencyWall Concrete The thicker they are, the less ra

Strany 89

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 179CS Coverage AreaThe example below shows the size of the coverage area of 1 CS if it

Strany 90 - 2.4.8 BRI4 and BRI8 Cards

1.1 System Highlights18 Installation Manual1.1 System Highlights1.1.1 System HighlightsNetworking FeaturesThis Hybrid IP-PBX supports the following ne

Strany 91

2.9 Connection of 2.4 GHz Portable Stations180 Installation Manualone CS becomes weak. However, if a PS moves away from a CS and there are no CSs avai

Strany 92 - LINE LED Pattern

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 1812.9.4 Before Site SurveySetting and Installing the CS Temporarily for Site Survey1.

Strany 93 - Installation Manual 93

2.9 Connection of 2.4 GHz Portable Stations182 Installation Manual3. After setting the DIP switch, connect an AC adaptor or battery box to the CS usin

Strany 94 - 2.4.9 PRI30 Card

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 1832.9.5 Site SurveyThe PS has a Radio Signal Test mode that monitors the state of the

Strany 95

2.9 Connection of 2.4 GHz Portable Stations184 Installation Manual2. Measure the radio signal strength by moving to and away from the CS.a. Move to th

Strany 96

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 185b. Overlap the CS coverage areas of at least 2 CSs at any location in the installati

Strany 97

2.9 Connection of 2.4 GHz Portable Stations186 Installation ManualDeleting the Stored Scan DataUsing the KX-TD7680Using the KX-TD7690Press 1, 9, and P

Strany 98 - 2.4.10 PRI23 Card

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 1872.9.6 After Site SurveyAfter obtaining the proper measurement results, exit the Radi

Strany 99

2.9 Connection of 2.4 GHz Portable Stations188 Installation Manual2.9.7 Connecting a Cell Station to the Hybrid IP-PBXUsing a CSIF CardRefer to the fo

Strany 100 - 0.5 mm: Under 200 m

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 189Using a DHLC/DLC CardRefer to the following example to connect a CS to the Hybrid IP

Strany 101 - 2.4.11 IP-GW4 Card

1.1 System HighlightsInstallation Manual 19Parallelled Telephone FeaturesBy connecting telephones in parallel, you can increase the number of telephon

Strany 102 - LED Indications

2.9 Connection of 2.4 GHz Portable Stations190 Installation ManualConnecting the CS1. Connect the cable from the CSIF/DHLC/DLC card to the CS.2. Pass

Strany 103 - 2.4.12 IP-GW4E Card

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 191Registering the PSThe PS must be registered to the Hybrid IP-PBX before it can be us

Strany 104

2.9 Connection of 2.4 GHz Portable Stations192 Installation ManualPS RegistrationWhen the PS has not been registered yetWhen registering the PS for th

Strany 105 - 2.4.13 IP-GW16 Card

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 193Setting the System LockWhen a system lock has been set, the system lock password wil

Strany 106

2.9 Connection of 2.4 GHz Portable Stations194 Installation ManualSetting the Personal Identification Number (PIN) for PS RegistrationTo prevent regis

Strany 107 - 2.5.1 CSIF4 and CSIF8 Card

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 195PS TerminationConfirm the following before cancelling the PS registration:• PS is tu

Strany 108 - Pin Assignments

2.9 Connection of 2.4 GHz Portable Stations196 Installation Manual2.9.8 Wall Mounting1. Place the reference for wall mounting (on the following page)

Strany 109 - 2.5.2 DHLC8 Card

2.9 Connection of 2.4 GHz Portable StationsInstallation Manual 197Reference for Wall MountingPlease copy this page and use as a reference for wall mou

Strany 110

2.10 Connection of Doorphones, Door Openers, External Sensors, and External Relays198 Installation Manual2.10 Connection of Doorphones, Door Openers,

Strany 111

2.10 Connection of Doorphones, Door Openers, External Sensors, and External RelaysInstallation Manual 1992. Pass the wires through the hole in the bas

Strany 112 - 2.5.3 DLC8 Card

2 Installation ManualSystem ComponentsSystem Components TableModel DescriptionShelves KX-TDA100 Basic ShelfKX-TDA200 Basic ShelfMain Processing Card M

Strany 113

1.2 Basic System Construction20 Installation Manual1.2 Basic System Construction1.2.1 Basic ShelfThe basic shelf contains an MPR card. For system expa

Strany 114 - 2.5.4 DLC16 Card

2.10 Connection of Doorphones, Door Openers, External Sensors, and External Relays200 Installation Manual2. Attach the terminal blocks to the connecto

Strany 115

2.11 Connection of PeripheralsInstallation Manual 2012.11 Connection of Peripherals2.11.1 Connection of PeripheralsBGM/MOHThe Hybrid IP-PBX provides B

Strany 116 - 2.5.5 SLC8 Card

2.11 Connection of Peripherals202 Installation ManualPagerUp to 2 paging devices (user-supplied) can be connected to the Hybrid IP-PBX.CAUTIONExternal

Strany 117

2.11 Connection of PeripheralsInstallation Manual 203For connecting a printer/PC with a 25-pin RS-232C connectorRS-232C Signals• Receive Data (RXD):…(

Strany 118 - 2.5.6 EXT-CID Card

2.11 Connection of Peripherals204 Installation ManualPC/Server PC (via USB version 1.1)The Hybrid IP-PBX is equipped with a USB interface. This interf

Strany 119 - 2.5.7 SLC16 and MSLC16 Cards

2.12 Power Failure ConnectionsInstallation Manual 2052.12 Power Failure Connections2.12.1 Power Failure ConnectionsWhen the power supply to the Hybrid

Strany 120

2.12 Power Failure Connections206 Installation ManualRJ11 Connector Pin Assignments for Analogue Trunk CardPFT Ports 1 and 2PFT Ports 3 and 4 (for LCO

Strany 121 - 2.5.8 IP-EXT16 Card

2.12 Power Failure ConnectionsInstallation Manual 207Using BRI CardLINE 1 and LINE 2 of the BRI4 and BRI8 cards can be used for Power Failure Connecti

Strany 122

2.12 Power Failure Connections208 Installation ManualRJ45 Connector LINE 2 Pin AssignmentsNo. Signal Name Level [V] Function1-2 Reserved ––3 RX2 (+) R

Strany 123 - 2.6.1 OPB3 Card

2.13 Starting the Hybrid IP-PBXInstallation Manual 2092.13 Starting the Hybrid IP-PBX2.13.1 Starting the Hybrid IP-PBXCAUTION• SD Memory Card must be

Strany 124 - 2.6.2 DPH4 Card

1.2 Basic System ConstructionInstallation Manual 211.2.2 System Connection DiagramPCIP-PTDoorphone & Door OpenerBGM/Music On Hold (MOH)Pager/Speak

Strany 125

2.13 Starting the Hybrid IP-PBX210 Installation Manual2. Plug the AC power cord into the Hybrid IP-PBX and an AC outlet, and turn on the Hybrid IP-PBX

Strany 126 - 2.6.3 DPH2 Card

2.13 Starting the Hybrid IP-PBXInstallation Manual 211To confirm, dial [ ] [3] [7] + trunk number (3 digits) or press S-CO button. You will hear a dia

Strany 127

2.13 Starting the Hybrid IP-PBX212 Installation Manual

Strany 128 - Doorphone 1

Installation Manual 213Section 3Guide for the KX-TDA Maintenance ConsoleExplains the installation procedure, structure, and basic information of the K

Strany 129 - 2.6.4 EIO4 Card

3.1 Overview214 Installation Manual3.1 Overview3.1.1 OverviewKX-TDA Maintenance Console is designed to serve as an overall system programming referenc

Strany 130

3.2 ConnectionInstallation Manual 2153.2 Connection3.2.1 ConnectionSerial Interface ConnectionNoteFor pin assignments and maximum cabling distance, re

Strany 131 - Installation Manual 131

3.2 Connection216 Installation ManualExternal Modem ConnectionAfter connecting the Hybrid IP-PBX and the external modem, set the power switch of the e

Strany 132 - 2.6.5 ECHO16 Card

3.3 Installation of the KX-TDA Maintenance ConsoleInstallation Manual 2173.3 Installation of the KX-TDA Maintenance Console3.3.1 Installing and Starti

Strany 133 - 2.6.6 MSG4 Card

3.3 Installation of the KX-TDA Maintenance Console218 Installation ManualInstalling the KX-TDA Maintenance ConsoleNotes• Make sure to install and use

Strany 134 - 2.6.7 CTI-LINK Card

3.3 Installation of the KX-TDA Maintenance ConsoleInstallation Manual 2191. Connect the PC to the Hybrid IP-PBX with a USB cable.2. Start the KX-TDA M

Strany 135

1.2 Basic System Construction22 Installation ManualSLT Wireless PhoneFax MachineCS PSPCKX-T7636/KX-T7633DSS ConsoleDoorphone & Door OpenerPT-inter

Strany 136 - 2.7 Connection of Extensions

3.3 Installation of the KX-TDA Maintenance Console220 Installation ManualNotice1. During a long programming session, it is highly recommended that you

Strany 137 - With DPT

Installation Manual 221Section 4TroubleshootingThis section provides information on the Hybrid IP-PBX and telephone troubleshooting.

Strany 138 - Using an EXtra Device Port

4.1 Troubleshooting222 Installation Manual4.1 Troubleshooting4.1.1 InstallationPROBLEM PROBABLE CAUSE SOLUTIONExtension does not operate. Bad extensio

Strany 139 - Using a Modular T-Adaptor

4.1 TroubleshootingInstallation Manual 223The ALARM indicator on the front of the cabinet turns on red.A major system error occurs in the Hybrid IP-PB

Strany 140

4.1 Troubleshooting224 Installation Manual4.1.2 ConnectionConnection between the Hybrid IP-PBX and a PT:Connection between the Hybrid IP-PBX and an SL

Strany 141 - With KX-T7600E Series DPT

4.1 TroubleshootingInstallation Manual 225Connection between the trunk and the Hybrid IP-PBX:CAUSETrunk is connected to the T2/T1.Trunk is connected t

Strany 142

4.1 Troubleshooting226 Installation Manual4.1.3 OperationPROBLEM PROBABLE CAUSE SOLUTION• When using the speakerphone on an APT, nothing is audible.•

Strany 143 - Connecting to a Master DPT

4.1 TroubleshootingInstallation Manual 227• PS stays out of service when the CS status is changed from Out of Service to In Service.• It may take abou

Strany 144

4.1 Troubleshooting228 Installation Manual4.1.4 Using the Reset ButtonIf the Hybrid IP-PBX does not operate properly, use the Reset Button. Before usi

Strany 145 - 2.8.1 Overview

4.1 TroubleshootingInstallation Manual 2294.1.5 Troubleshooting by Error LogWhen a major system error occurs in the Hybrid IP-PBX, the ALARM indicator

Strany 146 - 146 Installation Manual

1.2 Basic System ConstructionInstallation Manual 23*1 The KX-TDA100CN and KX-TDA200CN have a power supply unit (PSU-S and PSU-M, respectively) pre-ins

Strany 147 - 2.8.2 Procedure Overview

4.1 Troubleshooting230 Installation Manual5 Sub Code Five-digit sub code (1XXYY)1: Cabinet numberXX: Slot numberKX-TDA100: 00 to 06 (00: MPR slot; 01

Strany 148 - 6. Mount the CS on the wall

4.1 TroubleshootingInstallation Manual 231List of Errors and SolutionsThe tables below list the errors and their solutions.When an error whose error c

Strany 149 - 2.8.3 Site Planning

4.1 Troubleshooting232 Installation ManualSystem Start-up and On-line OperationError Code Error Message PROBABLE CAUSE SOLUTION000* MPR WDT overflow •

Strany 150 - 150 Installation Manual

4.1 TroubleshootingInstallation Manual 233016 CS overload • Defective cable• CS malfunction• Optional service card malfunction: CSIF• Check the cable

Strany 151 - Site Survey Preparation

4.1 Troubleshooting234 Installation Manual023 System data file version error• Old system files on SD Memory Card• Defective system files on SD Memory

Strany 152 - 152 Installation Manual

4.1 TroubleshootingInstallation Manual 235202* LPR start up error (No Program)• Optional service card malfunction: DHLC, DLC, CSIF, T1, E1, BRI, PRI,

Strany 153 - 2.8.4 Before Site Survey

4.1 Troubleshooting236 Installation Manual300* Digital trunk out of synchronization• Network (digital trunk) malfunction• Optional service card malfun

Strany 154 - CS No. CS ID No

4.1 TroubleshootingInstallation Manual 237310* Port Link Failure • Voice Processing System malfunction• Ports defective on optional service card: DHLC

Strany 155 - Channel 0

4.1 Troubleshooting238 Installation Manual353 IP-PT DSP failure • IP-PT malfunction • The IP-PT will be rebooted automatically if the error is tempora

Strany 156 - 156 Installation Manual

4.1 TroubleshootingInstallation Manual 239375 NDSS message over IPGW notification - caused by Network side• Network malfunction • Ignore if not freque

Strany 157 - Channel No

1.3 Options24 Installation Manual1.3 Options1.3.1 OptionsModel No. Model Name DescriptionKX-TDA0105 Memory Expansion Card (MEC) Memory expansion card

Strany 158 - 158 Installation Manual

4.1 Troubleshooting240 Installation Manual

Strany 159 - Channel no. 2 Channel no. 3

Installation Manual 241Section 5Appendix

Strany 160 - Clearing the Stored Scan Data

5.1 Revision History242 Installation Manual5.1 Revision History5.1.1 Version 1.1New Options• System Components TableNew Contents• 2.7.3 Digital EXtra

Strany 161 - 2.8.6 After Site Survey

5.1 Revision HistoryInstallation Manual 2435.1.2 Version 2.0New Options• System Components TableChanged Contents• 1.4.3 System Capacity• 2.10.1 Connec

Strany 162 - Using a CSIF Card

5.1 Revision History244 Installation Manual

Strany 163 - Using a DHLC/DLC Card

Installation Manual 245Index

Strany 164 - Connecting the CS

Index246 Installation ManualNumerics16-Channel Echo Canceller Card (KX-TDA0166) 24, 13216-Channel VoIP Extension Card (KX-TDA0470) 25, 12116-Channel V

Strany 165 - To CSIF card

IndexInstallation Manual 247Installation of the Main Processing Card 71Installation of the Other Cards 123Installation of the Trunk Cards 75Installati

Strany 166 - Registering the PS

Index248 Installation ManualSLC16 and MSLC16 Cards 119SLC8 Card 116Specifications 27Starting the Hybrid IP-PBX 209Starting the KX-TDA Maintenance Cons

Strany 167 - Installation Manual 167

IndexInstallation Manual 249

Strany 168 - PIN for PS Registration

1.3 OptionsInstallation Manual 25KX-TDA0182 8-Port DID Card (DID8) 8-port DID trunk card.KX-TDA0183 4-Port Analogue Trunk Card (LCOT4) 4-port analogue

Strany 169 - PS Termination

Panasonic Communications Co., Ltd.1-62, 4-chome, Minoshima, Hakata-ku, Fukuoka 812-8531, JapanPSQX2633VACopyright:This material is copyrighted by Pana

Strany 170 - Testing the Operation

1.3 Options26 Installation ManualKX-TDA0490 16-Channel VoIP Gateway Card (IP-GW16)16-channel VoIP gateway card. Compliant with VoIP H.323 V.2 protocol

Strany 171 - 2.8.8 Wall Mounting

1.4 SpecificationsInstallation Manual 271.4 Specifications1.4.1 General DescriptionControl Bus Original bus (16-bit, 8 MHz, 10 megabytes per second)Co

Strany 172 - Reference for Wall Mounting

1.4 Specifications28 Installation ManualExtension Connection Cable SLT 1-pair wire (T, R)DPT 1-pair wire (D1, D2) or2-pair wire (T, R, D1, D2)APT 2-pa

Strany 173 - 2.9.1 Overview

1.4 SpecificationsInstallation Manual 291.4.2 CharacteristicsTerminal Equipment Loop Limit • PT: KX-T7600 series: 90 Ω; all other DPTs/APTs: 40 Ω• SLT

Strany 174 - 174 Installation Manual

Installation Manual 3Other Cards KX-TDA0161 4-Port Doorphone Card (DPH4)KX-TDA0162 2-Port Doorphone Card (German Type) (DPH2)KX-TDA0164 4-Port Externa

Strany 175 - 2.9.2 Procedure Overview

1.4 Specifications30 Installation Manual1.4.3 System CapacityMaximum Optional Service CardsThere are 2 types of optional service cards for installatio

Strany 176

1.4 SpecificationsInstallation Manual 31The following number of optional service cards can be installed in the various slots of the Hybrid IP-PBX.Card

Strany 177 - 2.9.3 Site Planning

1.4 Specifications32 Installation ManualCards Mounted on Other Optional Service CardsThe following number of optional service cards can be mounted on

Strany 178 - 178 Installation Manual

1.4 SpecificationsInstallation Manual 33Maximum Terminal EquipmentThe following number of items of terminal equipment can be supported by the Hybrid I

Strany 179

1.4 Specifications34 Installation ManualCalculation Example (KX-TDA100)The total MEC figure is 88. As this exceeds 64, you need to install an MEC card

Strany 180 - 180 Installation Manual

1.4 SpecificationsInstallation Manual 35PSU CapabilityEach PSU supports a different amount of load figures.Calculation Example (KX-TDA200)The total lo

Strany 181 - 2.9.4 Before Site Survey

1.4 Specifications36 Installation Manual

Strany 182 - 182 Installation Manual

Installation Manual 37Section 2InstallationThis section describes the procedures to install the Hybrid IP-PBX. Detailed instructions for planning the

Strany 183 - 2.9.5 Site Survey

2.1 Before Installation38 Installation Manual2.1 Before Installation2.1.1 Before InstallationPlease read the following notes concerning installation a

Strany 184 - 184 Installation Manual

2.1 Before InstallationInstallation Manual 393. Avoid using the same power supply outlet for computers, telexes, and other office equipment. Otherwise

Strany 185 - Scan Data No

4 Installation ManualAvailable Proprietary TelephonesThe Hybrid IP-PBX supports all of the Panasonic KX-T7000, KX-TD7000, KX-TCA, and KX-NT series:• D

Strany 186 - Deleting the Stored Scan Data

2.2 Installation of the Hybrid IP-PBX40 Installation Manual2.2 Installation of the Hybrid IP-PBX2.2.1 UnpackingUnpack the box and check the items belo

Strany 187 - 2.9.6 After Site Survey

2.2 Installation of the Hybrid IP-PBXInstallation Manual 412.2.2 Names and LocationsInside ViewNote* Null slot is not available for any optional servi

Strany 188

2.2 Installation of the Hybrid IP-PBX42 Installation Manual2.2.3 Opening/Closing the Front CoverOpening the Front Cover1. Insert a flathead screwdrive

Strany 189

2.2 Installation of the Hybrid IP-PBXInstallation Manual 43Closing the Front Cover1. Hook the front cover onto the cabinet (line up the protrusions on

Strany 190

2.2 Installation of the Hybrid IP-PBX44 Installation Manual2.2.4 Installing/Replacing the Power Supply UnitFunctionAccessory and User-supplied ItemsAc

Strany 191

2.2 Installation of the Hybrid IP-PBXInstallation Manual 453. Never install or replace PSU unless at least 20 s has elapsed after the AC supply and ba

Strany 192 - Extn. No

2.2 Installation of the Hybrid IP-PBX46 Installation Manual2. Push the release lever in the direction of the arrow, so that the PSU engages securely w

Strany 193 - System Lock Password

2.2 Installation of the Hybrid IP-PBXInstallation Manual 472. Turn the 4 screws anticlockwise to loosen them.3. Pull the release lever in the directio

Strany 194

2.2 Installation of the Hybrid IP-PBX48 Installation Manual2.2.5 Frame Earth ConnectionIMPORTANTConnect the frame of the Hybrid IP-PBX to earth.• Be s

Strany 195

2.2 Installation of the Hybrid IP-PBXInstallation Manual 492.2.6 Backup Batteries ConnectionThe backup batteries and Back-up Battery Cable (KX-A228 fo

Strany 196 - 2.9.8 Wall Mounting

Installation Manual 5Important Safety InstructionsSAFETY REQUIREMENTSWhen using your telephone equipment, basic safety precautions should always be fo

Strany 197

2.2 Installation of the Hybrid IP-PBX50 Installation Manual2.2.7 Installing/Removing the Optional Service CardsCAUTIONTo protect the back board from s

Strany 198 - Sensors, and External Relays

2.2 Installation of the Hybrid IP-PBXInstallation Manual 512. Holding the card as shown below, push the release lever in the direction of the arrow so

Strany 199 - Connection

2.2 Installation of the Hybrid IP-PBX52 Installation ManualCovering the Blank SlotsBe sure to cover each slot in which no optional service card is ins

Strany 200 - To doorphones/

2.2 Installation of the Hybrid IP-PBXInstallation Manual 53Handling of the CablesWhen cables are connected to the Hybrid IP-PBX, run the cables to eit

Strany 201 - Installation Manual 201

2.2 Installation of the Hybrid IP-PBX54 Installation ManualRemoving the Optional Service Cards1. Turn the 2 screws anticlockwise to loosen them.2. Pul

Strany 202 - PC/Printer (via RS-232C)

2.2 Installation of the Hybrid IP-PBXInstallation Manual 552.2.8 Types of ConnectorsConnector Type Pin Number Used for(Twisted pair cable)• DHLC8 (KX-

Strany 203 - Installation Manual 203

2.2 Installation of the Hybrid IP-PBX56 Installation Manual• DPH4 (KX-TDA0161)• DPH2 (KX-TDA0162)• EIO4 (KX-TDA0164)• IP-GW4 (KX-TDA0480)• Basic Shelf

Strany 204

2.2 Installation of the Hybrid IP-PBXInstallation Manual 572.2.9 Attaching a Ferrite CoreA ferrite core must be attached when:• connecting T1, E1, PRI

Strany 205 - (e.g., SLC8)

2.2 Installation of the Hybrid IP-PBX58 Installation ManualNoteFor every 4 cables, use 1 ferrite core; a ferrite core holds a maximum of 4 cables.When

Strany 206 - 206 Installation Manual

2.2 Installation of the Hybrid IP-PBXInstallation Manual 592.2.10 Fastening Amphenol Type ConnectorAn Amphenol 57JE type connector is used on some of

Strany 207 - Using BRI Card

6 Installation Manual15. Do not use the telephone to report a gas leak in the vicinity of the leak.SAVE THESE INSTRUCTIONS

Strany 208 - 208 Installation Manual

2.2 Installation of the Hybrid IP-PBX60 Installation ManualAmphenol Connector Pin Assignment ChartBelow is an Amphenol connector pin assignment chart

Strany 209 - Installation Manual 209

2.2 Installation of the Hybrid IP-PBXInstallation Manual 612.2.11 Wall Mounting (KX-TDA200)CAUTIONDrive mounting screws into the wall. Be careful to a

Strany 210

2.2 Installation of the Hybrid IP-PBX62 Installation Manual2. Hook the cabinet onto the metal bracket, making sure that the unit slides down and onto

Strany 211 - Installation Manual 211

2.2 Installation of the Hybrid IP-PBXInstallation Manual 632.2.12 Wall Mounting (KX-TDA100)CAUTIONDrive mounting screws into the wall. Be careful to a

Strany 212 - 212 Installation Manual

2.2 Installation of the Hybrid IP-PBX64 Installation Manual2. Hook the cabinet onto the metal bracket, making sure that the unit slides down and onto

Strany 213 - Section 3

2.2 Installation of the Hybrid IP-PBXInstallation Manual 652.2.13 Floor Standing (KX-TDA200 Only)1. Install 4 anchor plugs in the floor, using the met

Strany 214 - 3.1 Overview

2.2 Installation of the Hybrid IP-PBX66 Installation Manual3. Lift the cabinet, attach it to the metal bracket, slide it backwards until it locks, and

Strany 215 - 3.2 Connection

2.2 Installation of the Hybrid IP-PBXInstallation Manual 67• Make sure that the surface behind the cabinet is not made of wood.• Be careful not to dro

Strany 216 - External Modem Connection

2.2 Installation of the Hybrid IP-PBX68 Installation Manual2.2.14 Surge Protector InstallationOverviewA massive electrical surge can be caused if ligh

Strany 217 - Password Security

2.2 Installation of the Hybrid IP-PBXInstallation Manual 69Outside InstallationIf you install an extension outside of the building, the following prec

Strany 218 - Items (Quick Setup)

Installation Manual 7Precaution• Keep the unit away from heating appliances and electrical noise generating devices such as fluorescent lamps, motors

Strany 219 - Installation Manual 219

2.2 Installation of the Hybrid IP-PBX70 Installation Manual1. Connect the earth rod to the surge protector using an earthing wire with a cross-section

Strany 220 - 220 Installation Manual

2.3 Installation of the Main Processing CardInstallation Manual 712.3 Installation of the Main Processing Card2.3.1 MPR CardFunctionContains the main

Strany 221 - Troubleshooting

2.3 Installation of the Main Processing Card72 Installation Manual• A LITHIUM BATTERY IS USED IN THE MPR CARD. THERE IS A RISK OF EXPLOSION IF BATTERY

Strany 222 - 4.1 Troubleshooting

2.3 Installation of the Main Processing CardInstallation Manual 732.3.2 MEC CardFunctionMemory expansion card to increase system data storage space, e

Strany 223

2.3 Installation of the Main Processing Card74 Installation Manual2.3.3 RMT CardFunctionAnalogue modem card for remote communication with the Hybrid I

Strany 224 - 4.1.2 Connection

2.4 Installation of the Trunk CardsInstallation Manual 752.4 Installation of the Trunk Cards2.4.1 LCOT4, LCOT8, and LCOT16 CardsFunctionAccessory and

Strany 225

2.4 Installation of the Trunk Cards76 Installation ManualPin AssignmentsAmphenol ConnectorNotes• Pin assignments for the pins 5 to 8 and 30 to 33 are

Strany 226 - 4.1.3 Operation

2.4 Installation of the Trunk CardsInstallation Manual 772.4.2 DID8 CardFunction8-port DID trunk card.Accessory and User-supplied ItemsAccessory (incl

Strany 227

2.4 Installation of the Trunk Cards78 Installation ManualLED IndicationsIndication Colour DescriptionCARD STATUS Green/Red Card status indication• OFF

Strany 228 - 4.1.4 Using the Reset Button

2.4 Installation of the Trunk CardsInstallation Manual 792.4.3 CID/PAY8 CardFunction8-port Caller ID signal type FSK/FSK (with Call Waiting Caller ID

Strany 229 - Error Log Display Format

8 Installation Manual• WHEN A FAILURE OCCURS WHICH EXPOSES ANY INTERNAL PARTS, DISCONNECT THE POWER SUPPLY CORD IMMEDIATELY AND RETURN THIS UNIT TO YO

Strany 230

2.4 Installation of the Trunk Cards80 Installation Manual2.4.4 CID8 CardFunction8-port Caller ID signal type FSK/FSK (with Call Waiting Caller ID [Vis

Strany 231 - List of Errors and Solutions

2.4 Installation of the Trunk CardsInstallation Manual 812.4.5 E&M8 CardFunction8-port E & M (TIE) trunk card. Type 5 support.Accessory and Us

Strany 232

2.4 Installation of the Trunk Cards82 Installation ManualPin AssignmentsAmphenol ConnectorNo. Signal Name Function No. Signal Name Function1 TA Tip po

Strany 233

2.4 Installation of the Trunk CardsInstallation Manual 83LED IndicationsIndication Colour DescriptionCARD STATUS Green/Red Card status indication• OFF

Strany 234

2.4 Installation of the Trunk Cards84 Installation Manual2.4.6 T1 CardFunction1-port T1 trunk card. EIA/TIA standard compliant.Accessory and User-supp

Strany 235

2.4 Installation of the Trunk CardsInstallation Manual 85Pin AssignmentsRJ45 Connector for Trunk UseRJ45 Connector for Extension UseLED IndicationsNo.

Strany 236

2.4 Installation of the Trunk Cards86 Installation ManualMaximum Cabling Distance of Extension ConnectionThe maximum distance of the extension cable t

Strany 237

2.4 Installation of the Trunk CardsInstallation Manual 872.4.7 E1 CardFunction1-port E1 trunk card. ITU-T standard compliant.Accessory and User-suppli

Strany 238

2.4 Installation of the Trunk Cards88 Installation ManualSwitch SettingsPin AssignmentsRJ45 Connector for Trunk UseRJ45 Connector for Extension useBNC

Strany 239

2.4 Installation of the Trunk CardsInstallation Manual 89BNC (coaxial) Connector (RX)LED IndicationsMaximum Cabling Distance of Extension ConnectionTh

Strany 240

Installation Manual 9The KX-TDA100E/KX-TDA200E, the KX-TDA100NE/KX-TDA200NE, the KX-TDA100GR/KX-TDA200GR, and the KX-TDA100CE/KX-TDA200CE are designed

Strany 241 - Appendix

2.4 Installation of the Trunk Cards90 Installation Manual2.4.8 BRI4 and BRI8 CardsFunctionAccessory and User-supplied ItemsAccessory (included): Ferri

Strany 242 - 5.1 Revision History

2.4 Installation of the Trunk CardsInstallation Manual 91Switch SettingsPin AssignmentsRJ45 Connector for Trunk UseRJ45 Connector for Extension UseLED

Strany 243 - 5.1.2 Version 2.0

2.4 Installation of the Trunk Cards92 Installation ManualLINE LED PatternLayer 1: ON (Synchronous)Layer 2: ON (Link established)/OFF (Link not establi

Strany 244

2.4 Installation of the Trunk CardsInstallation Manual 93Maximum Cabling Distance of S0 Bus ConnectionThe maximum distance of the extension cable that

Strany 245 - Installation Manual 245

2.4 Installation of the Trunk Cards94 Installation Manual2.4.9 PRI30 CardFunction1-port ISDN Primary Rate Interface card (30B channels). EURO-ISDN/ETS

Strany 246 - 246 Installation Manual

2.4 Installation of the Trunk CardsInstallation Manual 95Switch SettingsPin AssignmentsRJ45 Connector for Trunk UseRJ45 Connector for Extension UseBNC

Strany 247 - Installation Manual 247

2.4 Installation of the Trunk Cards96 Installation ManualBNC (coaxial) Connector (RX)LED IndicationsNo. Signal Name Level [V] Function1 RX- (-) Receiv

Strany 248 - 248 Installation Manual

2.4 Installation of the Trunk CardsInstallation Manual 97Maximum Cabling Distance of Extension ConnectionThe maximum distance of the extension cable t

Strany 249 - Installation Manual 249

2.4 Installation of the Trunk Cards98 Installation Manual2.4.10 PRI23 CardFunction1-port ISDN Primary Rate Interface card (23B channels). NI (North Am

Strany 250 - KK0103AH6094

2.4 Installation of the Trunk CardsInstallation Manual 99Pin AssignmentsRJ45 Connector for Trunk UseRJ45 Connector for Extension UseLED IndicationsNo.

Komentáře k této Příručce

Žádné komentáře