D-Link DES-1005E Uživatelská příručka stáhnout pdf (Strana 12)

ENGLISH

Installation

This section will explain how to connect Ethernet devices to your new D-Link switch and how to mount the switch.

Before You Connect to the Network

ThesitewhereyouinstalltheSwitchmaygreatlyaectitsperformance.PleasefollowtheseguidelinesforsettinguptheSwitch.

• InstalltheSwitchonasturdy,levelsurfacethatcansupportatleast3kg(6.6lbs.)ofweight.Donotplaceheavyobjectsonthe

Switch.

• Thepoweroutletshouldbewithin1.82meters(6feet)oftheSwitch.

• VisuallyinspectthepowercordandseethatitisfullysecuredtotheACpowerport.

• MakesurethatthereisadequatespaceforproperheatdissipationfromandadequateventilationaroundtheSwitch.Leaveat

least 10 cm (4 inches) of space at the front and rear of the Switch for ventilation.

• InstalltheSwitchinafairlycoolanddryplacefortheacceptabletemperatureandhumidityoperatingranges.

• InstalltheSwitchinasitefreefromstrongelectromagneticeldgenerators(suchasmotors),vibration,dust,anddirectexposure

to sunlight.

• WheninstallingtheSwitchonalevelsurface,attachtherubberfeettothebottomofthedevice.Therubberfeetcushionthe

Switch, protect the casing from scratches, and prevent it from scratching other surfaces.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Žádné komentáře

D-Link DES-1005E Uživatelská příručka Strana 12