D-Link DFL-900 Specifikace

1 Before You Begin It’s best to use a computer with an Ethernet adapter for configuring the DFL-900. The default IP address for the DFL-900 is 19

10 IP Address − this is the IP address that will be assigned to the LAN port. The default is 192.168.1.254 with a subnet mask of 255.255.255.0. Sub

11 IP Address − this is the IP address that will be assigned to the DMZ port. The default is 10.1.1.254 with a subnet mask of 255.255.255.0. Subnet

12 An example virtual server: Customize the rule name as the ftpServer. For any packets with its destination IP equaling to the WAN1 IP (61.2.1.1) and

13 APPENDIX To assign a Static IP address to the Ethernet adapter, please do the following steps. The examples below are using a DFE-530TX+ in Micro

14 Setting a Static IP address for Apple Macintosh OS X: Go to the Apple Menu and Select System Preferences. Click o

15 Click on Apply NowEnter the IP address information, the Subnet Mask and the Router’s IP address. Enter the following: IP address:

16 NOTES Technical SupportSoftware updates and documentation are available onthe D-Link website. D-Link provides free technical support for custo

2 ©2003 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective holders. Software and speci

3 Connecting the DFL-900 A. First, connect the power cord to the Power Socket at the back panel of the DFL-900 and then plug the other end of the p

4 Using the Setup Wizard A computer on your LAN1 must be assigned an IP address and Subnet Mask from the same range as the IP address and Subnet Mas

5 Step 4 － WAN Connectivity Choose the type of IP Address Assignment provided by your ISP to access the Internet. Here we have four types to select.

6 Step 4.c — PPPoE client If PPP over Ethernet is selected, enter the ISP-given User Name, Password and the optional Service Name. Click Next to p

7 Basic Setup Setting up a VPN and configuring the Firewall on the DFL-900 requires a deeper understanding of the protocols and security features o

8 2. Get IP Automatically If your ISP uses the Dynamic Host Configuration Protocol (DHCP) to assign an IP address, subnet mask, default gateway an

9 3. PPPoE If your ISP uses Point-to-Point Protocol over Ethernet (PPPoE), choose this option. When this option is chosen, the following fields appea