D-Link DVG-G1402S - Wireless Broadband VoIP Router Instalační příručka

Procházejte online nebo si stáhněte Instalační příručka pro Sítě D-Link DVG-G1402S - Wireless Broadband VoIP Router. D-Link DVG-G1402S - Wireless Broadband VoIP Router Installation guide Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk

Shrnutí obsahu

Strany 1 - DVG-G1402S

D-Link DVG-G1402S Wireless + 2Voice + 4SW VoIP Router Manual Building Networks for People Version B.1

Strany 2 - Contents

Using the Configuration Wizard 9 192.168.15.1 Whenever you want to configure your network or the DVG-G1402

Strany 3

Home > Wireless Wireless LAN Usage This drop-down menu allows you to enable or disable the Wireless LAN feature on the DVG-G1402S. Wireless LAN

Strany 4 - Package Contents

Home > Wireless > Wireless LAN Authorization Authentication This router employs three basic types of Authentication for access to the router’

Strany 5 - Introduction

Open Auth − Shared Key The Open Auth − Shared Key choice for Authentication will produce the screen shown above for the user’s configuration. The Ope

Strany 6 - Rear Panel Connections

Click Apply to set the information in the router’s memory. You will be prompted to restart the router to make the settings current. WPA WPA or Wire

Strany 7 - Front Panel LEDs

WPA-PSK WPA-PSK (Pre-Shared Key) uses the same encryption as the WPA but is implemented differently. All devices on the wireless network share the sam

Strany 8 - Features

Home > WAN Dynamic Choose Dynamic IP Address to obtain IP Address information automatically from your ISP. This option should be selected if yo

Strany 9 - Installation

MAC Address” button to copy the MAC address of the Ethernet Card installed by your ISP and replace the WAN MAC address with the MAC address of the rou

Strany 10

Home > WAN > Static IP Address Static IP Address Choose Static IP Address if all WAN IP information is provided to you by your ISP. You will

Strany 11 - Home > Wireless

18 DNS Fails. Upstream Bandwidth The upstream bandwidth can be set for the type of packets that the will be sent. The bandwidth can be maximized for

Strany 12

Contents Package Contents...3 Introduction .

Strany 13 - Open Auth − Shared Key

Home > WAN > PPPoE Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a u

Strany 14

Input the primary DNS (Domain Name Server) IP address provided by your ISP Primary DNS Address This is an optional DNS Addr

Strany 15

Home > LAN LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DV

Strany 16 - Home > WAN

Home > VoIP All of the screens necessary to setup and configure the router to handle VoIP traffic are accessed from the screen shown below. To acce

Strany 17

Home > VoIP > Server Configuration The Router can be configured to handle voice signals over the Internet Protocol (Voice over IP − VoIP). T

Strany 18

24 Server FQDN Use this drop-down menu to Enable or Disable the Server Fully Qualified Domain Name (FQDN) function. This is disabled when the SIP U

Strany 19

Home > VoIP > Provisioning Provisioning is a function that automatically updates your DVG-G1402S’s VoIP configuration by using a TFTP server

Strany 20 - Home > WAN > PPPoE

Home > VoIP > STUN Configuration Simple Traversal of UDP over NAT (STUN) − is a protocol which enables a VoIP device, such as this router o

Strany 21

proper interval, leave the default setting here. STUN NAT Type Displays the result of the STUN NAT examination. Home > VoIP > User Agent The R

Strany 22 - Home > LAN

Home > VoIP > Peer to Peer The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VOIP). Phone Num

Strany 23 - Home > VoIP

2 Home > VoIP > Speed Dial...30 Home > VoIP > Misc..

Strany 24

Home > VoIP > Telephony The Router can be configured to handle voice signals over the Internet Protocol (Voice Over IP − VoIP). Index Use this

Strany 25

Home > VoIP > Speed Dial The Router can be configured to dial a specified telephone number when you enter a numerical dial code. For example,

Strany 26

Home > VoIP > Misc. Instead of adding additional lines to handle different telephone numbers, distinctive rings can be set to allow more than o

Strany 27

Home > VoIP > Misc. > Ring Cadence By using the Ring Cadence window, you can set up to 8 distinct ring patterns. The ring pattern of each d

Strany 28

set at 12, 12, 8, 4, 10, 50, 0, 0. While some of the On and Off times are not multiples of 8, their sum of 96 meets the requirement so this would be a

Strany 29

Home > VoIP > Misc. > Ring Rule You can use the Ring Rule window to assign Caller IDs to frequently received inbound calls. Any call that

Strany 30

Home > VoIP > Manage Features > Reject Incoming Call You can configure the router to reject incoming calls from particular telephone numbers

Strany 31

Home > VoIP > Manage Features > Block Outgoing Call You can configure the router to reject outgoing calls from particular telephone numbers b

Strany 32 - Home > VoIP > Misc

Home > DHCP Dynamic Host Configuration Protocol (DHCP) allows the gateway to automatically obtain the IP address from a DHCP server on the service

Strany 33

corresponding Enabled radio button. Next the user must enter the host name and the IP address for that computer by entering the last numbers into the

Strany 34

3 Package Contents • D-Link DVG-G1402S Router • Power Adapter - AC 12V, 1.2A • Manual and Warranty on CD • Quick Installation Guide • Ethernet C

Strany 35

Home > Proxy DNS State Use this drop down menu to enable or disable the Proxy DNS. Proxy DNS IP Address Enter the IP Address o

Strany 36

Advanced > Virtual Server To view the following window, click on the Advanced tab at the top of the window and then click the Virtual Server butto

Strany 37

41 and set the Status fields to Enabled by clicking the radio button. To configure other virtual servers for the Router, configure the following fiel

Strany 38 - Home > DHCP

Advanced > Filters Packet filtering is a basic security measure that should be used on any network that is exposed to a security risk. A packet fi

Strany 39

passed through the Router from either side of the gateway. The rules are created and controlled by the network administrator and can be precisely defi

Strany 40 - Home > Proxy DNS

and then the Filters tab to the left hand side. Protocol The protocol associated with this IP filter. The user may choose between TCP, UDP or Both. I

Strany 41 - Advanced > Virtual Server

Advanced > Firewall This Router comes equipped with a firewall. The Firewall configuration screen allows the Router to enforce specific predefin

Strany 42

may choose between TCP, UDP, ICMP or (*) Any. The user may also select a range of ports of the destination IP addresses by entering the range under t

Strany 43 - Advanced > Filters

Advanced > Routing > Static Route The Routing table, shown to the right, allows you to enter static routes between computers on both the WAN (In

Strany 44

Advanced > NAT > NAT Configuration Network Address Translation (NAT) is a method by which the router translates between the IP address your ISP

Strany 45

Introduction The D-Link DVG-G1402S High-Speed VoIP Router Links traditional telephony networks to IP networks with conventional telephony devices suc

Strany 46 - Advanced > Firewall

Advanced > NAT > Dynamic NAT Network Address Translation (NAT) is a method by which the router translates between the IP address your ISP assig

Strany 47

Advanced > NAT > Static NAT Network Address Translation (NAT) is a method by which the router translates between the IP address your ISP assign

Strany 48

Tools > Admin At this page, the DVG-G1402S administrator can change the system password. There are two accounts that can access the Broadband Rout

Strany 49

Tools > System Backup Click Backup to backup the configuration file to your local hard drive. To restore the configuration file click on Br

Strany 50

Tools > Firmware You can update both the software and firmware of the Router. Please check the D-Link Support site for firmware updates at http:/

Strany 51

Tools > SNMP This menu can be accessed directly by clicking on the SNMP button or hyperlink in the Tools setup menu. Simple Network Management Pro

Strany 52 - Tools > Admin

Tools > Time The system time is the time used by the DVG-G1402S for scheduling services. You can manually set the time, connect to a NTP (network

Strany 53 - Tools > System

Status > Device Info This page displays the current information for the DVG-G1402S. It will display the LAN, WAN, Disk Information statistics.This

Strany 54 - Tools > Firmware

Status > Stats > Network The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted,

Strany 55 - Tools > SNMP

Status > Stats > Phone Call 58

Strany 56

Rear Panel Connections 5 Phone Connections Connect to your phones using standard phone cabling. All Ethernet Ports (WAN and LAN) are aut

Strany 57 - Status > Device Info

The Broadband Router keeps a running log of events and activities occurring on the Router. If the device is rebooted, the logs are automatically clea

Strany 58

Help The Help tab will give basic information referring to various screens locted in the Router. To view a specific section, click on its hyperlinked

Strany 59

Technical Specifications Standards  IEEE 802.3  IEEE 802.3u VPN Pass Through/ Multi-Sessions  PPTP  L2TP  I PSec Device Management  Web-Ba

Strany 60

Technical Specifications LEDs:  Power  WAN  LAN (10/100)  Phone  Status Physical Dimensions:  L = 7.56 inches (192mm)  W = 4.65 inches (

Strany 61

Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers w

Strany 62 - Technical Specifications

Front Panel LEDs Power LED A solid light indicates a valid connection to the power supply. Status LED A blinking LED indicates the DVG-G1402S is fun

Strany 63

7 Features • 1 NWay 10/100BASE-TX Fast Ethernet port for WAN-connection • 4 NWay 10/100BASE-TX Fast Ethernet port for LAN-connection • 2 Foreign

Strany 64 - Technical Support

8 Installation For a typical setup at home, please do the following: 1. You will need broadband Internet access (a Cable or DSL-subscriber line int

Komentáře k této Příručce

Žádné komentáře