D-Link DCS-1000 Uživatelská příručka

DCS-1000 Internet Camera Manual

9 Hardware Installation This section describes the Hardware installation procedure for DCS-1000. 1. Connect an Ethernet cable Connect an Etherne

10 Security To ensure the highest security and prevent unauthorized usage of DCS-1000 the Administrator has the exclusive privilege to access the S

11 Software Installation This section describes the Software installation procedure of DCS-1000 for Web Configuration and IPView Application. Web

12 Main Menu Image After the default IP address is entered from the browser DCS-1000 Home screen will appear with a still image. There will be thre

13 System Administration - System The System menu contains commands for settings that are required for inputting key details to set-up DCS-1000 for

14 Camera Name: This field is used for entering a descriptive name for the device. The default setting for the Camera Name is CS-xxxxxx, where xxxx

15 The default settings are as follows: • Default IP – 192.168.0.20 • Subnet Mask – 255.255.255.0 • Default Gateway – 0.0.0.0 Assign Au

16 Power - Steady On of the LED indicator. LAN - Steady On of the LED indicator with random flashing. The default setting for the LED control is at

17 DCS-1000 2 – IP 192.168.0.102, second web port 82 DCS-1000 3 – IP 192.168.0.103, second web port 83 DCS-1000 4 – IP 192.168.0.104, second web port

18 System Administration - Image Image menu in the system administration contains commands to provide the settings for the images captured by DCS-100

1 Contents CONTENTS ...1

19 Hue Control: Adjust the hue level with default setting at 64. Light Frequency: Adjust the light frequency to suit your area of operation from the

20 A maximum of 64 users names are allowed, however each users name must be different. Each user name can be used as a group given the password for

21 System Administration – DateTime The DateTime menu contains commands for setting DCS-1000's time and date requirements to provide correct inf

22 To set the Date Time manually select “Set Manually”. The system administrator must then enter the Date and Time in the respective field manually

23 System Administration – Trigger The Trigger menu contains commands for the I/O Trigger connectors providing the physical interface for 2 digital

24 • SMTP (Simple Mail Transfer Protocol) is a protocol for sending e-mail messages between servers you need to input the mail server address in thi

25 “Cancel” icon to restore all settings to the values last saved to or retrieved from DCS-1000. Please refer to the appendix for detailed in

26 System Administration - Information The Information menu contains commands for displaying information about DCS-1000. Click on “Information” in

27 Factory Reset: A factory reset restarts DCS-1000 and returns all of its settings to their default values. The Factory Reset panel contains the me

28 Camera Name* - The Camera name will be display when the Camera Name field is entered in the Web Configuration setting under “System” Location**-

2 HOW TO CHANGE IP ADDRESS...38 Change IP Address...

29 View Image – Java Mode Click on “View Image – Java Mode” from the Home screen to access the video images from the Internet Explorer or Netscape b

30 IPView Application Installation Installation Insert the CD-ROM into the CD-ROM drive to initiate the auto-run program. Once completed a menu sc

31 The Welcome screen will appear. Click on the “Next” button to proceed with the installation. The License Agreement prompt will appear as b

32 A prompt will appear and in the Destination Location dialog box, you may click on “Next” to accept the recommended destination location or click

33 or click on the “Finish” icon to complete the installation procedure After successfully installing the IPView, the application program for

34 Once IPView is executed a Login prompt will appear, you must enter the default User Name: “admin” into the respective field and click on “OK” to

35 IPView – Getting Started This section describes the operation of the IPView application User Interface with detailed procedures for using t

36 How to Change Password Change Password When IPView is used for the first time it is highly recommended to change the User Name and Password by

37 To change the User Name and Password select “Tools” > “Options”. The Options dialog box will appear as illustrated below. T

38 How to Change IP Address Change IP Address To change an IP Address for a camera select “Camera” > “Add”. An Add Camera dialog box will appear

3 About This Guide This manual describes DCS-1000, including a description of the features, as well as the installation procedures and web configura

39 You must highlight the camera you wish to change the IP Address and click on the “Change IP” icon and the Change IP Address dialog box will appe

40 How to Add a Camera Add Camera To add a new camera select “Camera” > “Add”. An Add Camera dialog box will appear as illustrated below. Y

41 Click on the “Search” icon and IPView will detect and search all the available camera’s that are installed on the local area network as depicted b

42 If the Login Camera dialog box appears make sure to enter the correct User Name and Password and click on the “OK” icon and the camera will be a

43 How to Delete a Camera Delete Camera To delete a camera you must highlight the camera you wish to delete from IPView list view format. From the

44 How to View a Camera View Camera From the menu bar select “View” > “4 Cameras” (other choices are available in 1 Camera, 9 Cameras and 16 Came

45 How to Snap shot a Camera Snap shot Camera To snap shot a camera you must highlight the camera you wish to snap shot from the list view format.

46 IP Assignment There are two options to select from the IP Assignment either Manually Assign or Assign Automatically Using. Please refer to th

47 Wireless (Please skip this section if your camera is not wireless) Allows setting for connection mode, network name, wireless channel, and

48 Image Image provides the settings for the video image of the camera such as brightness, contrast, hue, resolution, compression, frame rate, and

4 IPView Application: • Win 98, Win 98 SE, Win 2000, Win Me, Win XP • Pentium III, 450 MHz or above • Memory Size of 128 MB (256 MB recommended) •

49 To add a user click on the “Add” icon and the Add User dialog box will appear. Enter the User Name and Password into the specific field. Sel

50 Trigger 1 Contains commands for setting the I/O Trigger connectors providing the physical interface for 1 digital output and 1 digital input th

51 Trigger 2 Contains commands for setting the I/O Trigger connectors providing the physical interface for 1 digital output and 1 digital input tha

52 Tools Contains commands to reset the camera and update firmware (please refer to the appendix for detailed information). Please refer to the We

53 Note: Alternatively you can click the Property icon as illustrated or use the hot key “F2”. Menu Bar The menu bar provides easier access fo

54 Columns When “Columns” is launched a dialog box will appear allowing the option to choose the columns one would like to display in List View as i

55 Note: Right click the mouse pad on any kind of the camera will bring up a context sensitive menu which shows the actions you can apply to the se

56 Enable Function By default the video image is enabled. There will be a “check” next to the Enable command to show that the Enable function is w

57 IPView Icon Description Open a new file. Alternatively the hot key is Ctrl+N. Open an existing file. Alternatively the hot key is Ctrl+O.

58 Context Sensitive Menu In list view format by highlighting a camera and right clicking the mouse pad will bring up a context sensitive menu for

5 Connection to External Devices Supporting auxiliary Input/Output Connector, you can connect DCS-1000 to a variety of external devices such as IR-se

59 In view mode format click on the icon located on the upper left corner of the screen and a case sensitive menu will appear as illustrated below.

60 Uninstall IPView Application Click on windows Start Menu / Settings / Control Pane l. A prompt screen will be displayed like the one below and

61 From the Add/Remove Programs Properties Menu, select “IPView” as illustrated below. Then click on the “Remove” button. A n

62 The InstallShield Wizard prompt will appear and click on “Finish” to complete the uninstallation procedure.

63 Appendix Frequently Asked Questions Internet Camera Features Q: What is a Internet Camera? A: DCS-1000 is a standalone system connecting direc

64 Q: What network cabling is required for DCS-1000? A: DCS-1000 uses Category 5 UTP cable allowing 10 Base-T and 100 Base-T networking. Q: Can D

65 PING Your IP Address The PING (Packet Internet Groper) command can determine whether a specific IP address is accessible by sending a packet to

66 Trouble Shooting Q: I cannot access DCS-1000 from a web browser? A1: The possible cause might be the IP Address for the DCS-1000 is already bei

67 cabling is OK and your network is reachable, you should receive a reply similar to the following (…bytes = 32 time = 2 ms). A2: The network devi

68 Note: Applying only 16 or 256 colors on your computer will produce dithering artifacts in the image. A2: The configuration on the DCS-1000 image

6 monitoring purpose from Normal / Off / Dummy. Please refer to the Web Configuration section for detailed information and usage. LAN LED The L

69 I/O Connector I/O Connector Definition for DCS-1000 An 8-pole connector is provided for auxiliary IO connections to the DCS-1000. The IO connec

70 I/O Schematic Diagram Note: Through the Web Configuration in the Trigger section, you must first enable the trigger function. Please

71 Upgrade Firmware User’s can update firmware from the IPView application. Select “Camera” > “Properties” and the Camera Property dialog box

72 Time Zone Table

73

74 Xplug Control Installation Installation To Web Server 1. Installation: Copy the “xplug.ocx” file to any WEB Server table. 2. Setting (C

75 Installation To Local PC Insert the CD-ROM into the CD-ROM drive to initiated the auto-run program once completed a menu screen will appear as fo

76 The License Agreement prompt will appear as below. Read the details carefully and click on the “Yes” icon to continue with the installation

77

78 Adjust Internet Camera Focus DCS-1000 features an exchangeable CS-type lens that can be used for different applications as necessary. It support

7 DC Power Connector The DC power input connector is located on DCS-1000’s rear panel and is labeled DC 5V with a single jack socket to supply powe

79 Replacing the Lens Since the DCS-1000 is designed with a CS- mount, the lens equipped with the DCS-1000 can be replaced with any standard C or CS

80 Specification Video Specification Resolution: 640 x 480 pixel Sensor: 1/3” color CMOS sensor Gain control: Automatic Exposur

81 Pin 7 Output Port (2+) Pin 8 Output Port (2-) Note: The output voltage is DC 5V and maximum current is 100mA. LED Indicator: Power LED (

82 Technical Support D-Link provides free technical support for customers within the United States during the warranty period. U.S. customers can co

8 Unpacking The DCS-1000 Carefully remove all items from the package. In addition to this User’s Guide, be certain that you have: • One Internet