D-Link DCS 5300 - Network Camera Specifikace stáhnout pdf (Strana 94)

Using IP surveillance Software (continued)

IP surveillance includes pan/tilt control, DI/DO (Digital Input / Digital Output)

control, and an alert message receiver. Each of these are described in detail

below.

DI/DO Control

Clicking on the “DI/DO” button shown below, you can switch to the DI/DO

controls. The color of the channel number indicates the status of the camera’s

DI (Digital Input). You can click the “Switch button” to change the HI/LOW state

of the DO (Digital Output). With these features, you can monitor the remote

sensor input from DI and also trigger the camera by DO switch

Monitor Program (continued)

Set digital output to LOW

Set digital output to HIGH

No connection

Refer to the following figure to use the pan and tilt controls.

Pan – Pans the camera one full cycle.

Stop – Stops movement of the camera during pan.

Patrol – Enables the Auto Patrol feature.

Pull down menu – Select a preset position to move the camera to.

Return to home position.

Tilt/navigate camera using arrows.

P/T Control

When the color of a DI/DO number is gray, that means the video has not yet

been connected to a camera.

1 2 ... 89 90 91 92 93 94 95 96 97 98 99 ... 142 143

Žádné komentáře

D-Link DCS 5300 - Network Camera Specifikace Strana 94