DVG-N5402SP User’s Manual SETUP
D-Link Systems, Inc. 6
Wireless Network Name (SSID): SSID is the name of your wireless network. All wireless-equipped
devices share the same SSID to communicate with each other. It must be unique to identify separated
wireless network. For security, you should change the default SSID to a special ID. By default the SSID will
be name “DVG-N5402SP-XXXXXX” and “XXXXXX” will be the last 6 numbers of your WAN connection
“TR069” MAC Address.
Visibility Status: Select the visibility status.
Visible indicates that the device broadcasts the SSID.
Invisible indicates that the device does not broadcast the SSID.
Country: Select the country where you are located from the drop-down menu.
802.11 Mode: The VoIP Router can operate in 2.4GHz ISM band with different speed of wireless
connection, Select the wireless band of your network.
802.11b
only
-
Allow
all
802.11B
compliant
wireless
devices
to
associate
with
the
wireless
AP.
802.11g
only
-
Allow
all
802.11G
compliant
wireless
devices
to
associate
with
the
wireless
AP.
802.11n
only
-
Allow
all
802.11N
compliant
wireless
devices
to
associate
with
the
wireless
AP.
Mixed
802.11b/g
–
Allow
a
mix
of
both
802.11B
and
802.11G
compliant
wireless
devices
to
associate
with
the
wireless
AP.
Mixed
802.11n/g
-
Allow
a
mix
of
both
802.11N
and
802.11G
compliant
wireless
devices
to
associate
with
the
wireless
AP.
Mixed
802.11b/g/n
-
Allow
a
mix
of
802.11B,
802.11G,
and
802.11N
compliant
wireless
devices
to
associate
with
the
wireless
AP.
Bandwidth: Select the bandwidth from the drop-down list. You can select 20M, 40M Plus, or 40M Minus.
Wireless Channel: Select a clear and appropriate channel for your wireless network. A device on your
wireless network must use a specific channel to transmit and receive data. If wireless network has overlap,
change a different channel number.
User Isolation: The isolation among all the stations that are connected with the same VAP (Virtual Access
Point). You can select Off or On.
Komentáře k této Příručce