D-Link DWL-2100AP - AirPlus Xtreme G Instalační příručka Strana 54

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 91
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 53
54
Using the AP Manager (continued)
DHCP Server: Enable or disable the DHCP server function.
Device Configuration>DHCP
IP Assigned From: Enter the initial IP address to be assigned by the DHCP server.
Range of Pool (1~255): Enter the number of allocated IP addresses.
SubMask: Enter the subnet mask.
Gateway: Enter the gateway IP address, typically a router.
Wins: Wins (Windows Internet Naming Service) is a system that determines the IP
address of a network computer with a dynamically assigned IP address, if applicable.
DNS: The IP address of the DNS server, if applicable.
Domain Name: Enter the domain name of the DWL-2100AP, if applicable.
Lease Time: The period of time that the client will retain the assigned IP address.
Status: This option turns the dynamic pool settings on or off.
Dynamic Pool Settings: Click to enable Dynamic Pool Settings. Congure the IP
address pool in theelds below.
Static Pool Settings: Click to enable Static Pool Settings. Use this function to assign the
same IP address to a device at every restart. The IP addresses assigned in the Static
Pool list must NOT be in the same IP range as the Dynamic Pool.
Zobrazit stránku 53
1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 90 91

Komentáře k této Příručce

Žádné komentáře