D-Link DIR-68 Uživatelský manuál stáhnout pdf (Strana 12)

8D-Link DIR-610N User Manual

Section 2 - Installation

If you are connecting the router to a cable/DSL/satellite modem, please follow the steps below:

1. Place the router in an open and central location. Do not plug the power adapter into the router.

2. Turn the power o on your modem. If there is no on/o switch, then unplug the modem’s power adapter. Shut

down your computer.

3. Unplug the Ethernet cable (that connects your computer to your modem) from your computer and plug it

into the Internet port on the router.

4. Plug an Ethernet cable into one of the four LAN ports on the router. Plug the other end into the Ethernet port

on your computer.

5. Turn on or plug in your modem. Wait for the modem to boot (about 30 seconds).

6. Plug the power adapter to the router and connect to an outlet or power strip. Wait about 30 seconds for the

router to boot.

7. Turn on your computer.

8. Verify the link lights on the router. The power light, Internet light, and the LAN light (the port that your computer

is plugged into) should be lit. If not, ensure that your computer, modem, and router are powered on, and that

the cables are correctly connected.

9. Skip to “Easy Setup Wizard” on page 10 to congure your router.

Connect to Cable/DSL/Satellite Modem

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 74 75

Žádné komentáře

D-Link DIR-68 Uživatelský manuál Strana 12